E6097 — Videojet
Missed Print (PD Too Close To Printhead)
severity: stopconfidence: verifiedkind: fault1 citation(s)
Scope: Videojet 1650 / 1650 UHS / 1550
Short answer: Videojet E6097 (Missed Print (PD Too Close To Printhead)) means: A print was missed because the product detector is too close to the printhead. First check: Check the printhead-to-detector distance and increase the gap or adjust the product.
Meaning
A print was missed because the product detector is too close to the printhead.
Likely causes
- Product detector to printhead distance too short for the line parameters
Checks
- Check the printhead-to-detector distance and increase the gap or adjust the product
- Clear the warning or power-cycle if it will not clear
Parts
- product detector
- printhead
Citations
type: manual · retrieved: 2026-11-21 · locator: p. 7-21
Missed Print (PD Too Close To Printhead)
Independent and unofficial. Verify against the manual for your exact model and serial number before acting. See this code on the owning surface: PackDesk.