E6047 — Videojet
Ink Viscosity Too Low
severity: stopconfidence: verifiedkind: fault1 citation(s)
Scope: Videojet 1650 / 1650 UHS / 1550
Short answer: Videojet E6047 (Ink Viscosity Too Low) means: The ink is too thin (pressure more than 0.1 bar below the calculated value). First check: Avoid repeated jet start/stop cycles that add make-up.
Meaning
The ink is too thin (pressure more than 0.1 bar below the calculated value).
Likely causes
- Too much make-up added, e.g. repeated start/stop cycles
- Ink system fault
Checks
- Avoid repeated jet start/stop cycles that add make-up
- Use the service manual or call a Videojet service engineer
Citations
Independent and unofficial. Verify against the manual for your exact model and serial number before acting. See this code on the owning surface: PackDesk.