E6008 — Videojet
EHT/HV Trip
severity: stopconfidence: verifiedkind: fault1 citation(s)
Scope: Videojet 1650 / 1650 UHS / 1550
Short answer: Videojet E6008 (EHT/HV Trip) means: The printer sensed arcing at the deflector plate (EHT leakage above the limit) and stopped printing. First check: Stop the jet and clean the deflector electrodes with the correct cleaning solution.
Meaning
The printer sensed arcing at the deflector plate (EHT leakage above the limit) and stopped printing.
Likely causes
- Ink build-up or wet ink on the deflector plate or charge electrode
- Printhead not fully dry at jet start
- Blocked nozzle or misaligned jet
- EHT/HV calibration out of date
Checks
- Stop the jet and clean the deflector electrodes with the correct cleaning solution
- Let the printhead dry fully before restarting
- Back-flush the nozzle
- Calibrate EHT/HV if the trip returns
Safety flags
- high_voltage
Parts
- deflector plate
- charge electrode
- nozzle
Citations
Independent and unofficial. Verify against the manual for your exact model and serial number before acting. See this code on the owning surface: PackDesk.