Err 50 — Victron
Inverter overload / peak current
severity: degradedconfidence: verifiedkind: error1 citation(s)
Scope: Victron SmartSolar / BlueSolar MPPT charge controllers, Inverter RS / Multi RS, Orion Smart DC-DC
Meaning
The inverter shut down because the load's inrush or steady current exceeded the over-current trip level. After three restarts with another overload it stays off until manually restarted.
Likely causes
- Motor or pump inrush current exceeding the trip level
- Excessive AC load
Checks
- Reduce the AC load (switch off or disconnect appliances)
- Restart the inverter if it locked out
Requires a qualified installer. Isolate and escalate to a qualified installer/electrician.
Parts
- AC loads
Citations
https://www.victronenergy.com/live/mppt-error-codes
type: vendor_kb · retrieved: 2026-11-21 · locator: § Err 50, Err 52 - Inverter overload, Inverter peak current
Some loads like motors or pumps draw large inrush currents in a start-up situation.
Independent and unofficial. Verify against the manual for your exact model and serial number before acting. See this code on the owning surface: SolarDesk.