Err 43 — Victron
Ground fault detected
severity: degradedconfidence: verifiedkind: error1 citation(s)
Scope: Victron SmartSolar / BlueSolar MPPT charge controllers, Inverter RS / Multi RS, Orion Smart DC-DC
Meaning
The voltage between Neutral and Ground is too high. On grid-connected systems this usually means the installation ground is missing/incorrect or Line and Neutral are swapped; on island systems the ground relay may be damaged. It does not auto-reset.
Likely causes
- Missing or incorrectly connected ground wire
- Line and Neutral swapped in the installation
- Damaged ground relay (island operation)
Checks
- Check the installation ground and Line/Neutral wiring
- Restart the unit with the power switch after correcting the wiring
Safety flags
- dc_arc
- grid_tie
Requires a qualified installer. Isolate and escalate to a qualified installer/electrician.
Parts
- ground wiring
- ground relay
Citations
https://www.victronenergy.com/live/mppt-error-codes
type: vendor_kb · retrieved: 2026-11-21 · locator: § Err 43 - Ground fault detected
The voltage difference between Neutral and Ground is too high.
Independent and unofficial. Verify against the manual for your exact model and serial number before acting. See this code on the owning surface: SolarDesk.