Err 41 — Victron
PV isolation failure
severity: degradedconfidence: verifiedkind: error1 citation(s)
Scope: Victron SmartSolar / BlueSolar MPPT charge controllers, Inverter RS / Multi RS, Orion Smart DC-DC
Meaning
The PV array's isolation resistance is too low. On inverters the unit restarts once resolved; solar chargers remain operational but keep the warning until cleared.
Likely causes
- Damaged PV cabling or connectors
- Panel insulation fault
- Moisture ingress
Checks
- Check PV array cabling and panel isolation
- On inverters, disconnect the PV array with the PV switch to resume AC operation
Safety flags
- dc_arc
- pv_dc
Requires a qualified installer. Isolate and escalate to a qualified installer/electrician.
Parts
- PV cabling
- panels
Citations
https://www.victronenergy.com/live/mppt-error-codes
type: vendor_kb · retrieved: 2026-11-21 · locator: § Err 41 - PV isolation failure
PV panel isolation resistance too low.
Independent and unofficial. Verify against the manual for your exact model and serial number before acting. See this code on the owning surface: SolarDesk.