Err 35 — Victron
PV over-power
severity: degradedconfidence: verifiedkind: error1 citation(s)
Scope: Victron SmartSolar / BlueSolar MPPT charge controllers, Inverter RS / Multi RS, Orion Smart DC-DC
Meaning
The internal DC voltage is too high (or, on older firmware, a known bug). Update firmware first; the error usually auto-resets.
Likely causes
- Firmware older than v1.08 (MPPT RS / Inverter RS / Multi RS)
- Internal DC voltage too high
Checks
- Update firmware to v1.08 or newer
- If it persists, isolate all power, wait 3 minutes, repower
Safety flags
- dc_arc
- pv_dc
Requires a qualified installer. Isolate and escalate to a qualified installer/electrician.
Parts
- firmware
- charge controller
Citations
https://www.victronenergy.com/live/mppt-error-codes
type: vendor_kb · retrieved: 2026-11-21 · locator: § Err 35 - PV over-power
Applies to the MPPT RS, Inverter RS and Multi RS products.
Independent and unofficial. Verify against the manual for your exact model and serial number before acting. See this code on the owning surface: SolarDesk.