Err 34 — Victron
PV over-current
severity: degradedconfidence: verifiedkind: error1 citation(s)
Scope: Victron SmartSolar / BlueSolar MPPT charge controllers, Inverter RS / Multi RS, Orion Smart DC-DC
Meaning
The solar array current exceeded the rated input current, or an internal fault occurred. Persistent failure after a power-cycle suggests a faulty controller.
Likely causes
- PV array current above rating
- Internal system fault
Checks
- Isolate all power, wait 3 minutes, repower
- Contact the dealer if it persists
Safety flags
- dc_arc
- pv_dc
Requires a qualified installer. Isolate and escalate to a qualified installer/electrician.
Parts
- charge controller
- PV array
Citations
https://www.victronenergy.com/live/mppt-error-codes
type: vendor_kb · retrieved: 2026-11-21 · locator: § Err 34 - PV over-current
The current from the solar-panel array has exceeded the rated current limit.
Independent and unofficial. Verify against the manual for your exact model and serial number before acting. See this code on the owning surface: SolarDesk.