103 — SWF

Trimmer knife did not return

severity: stopconfidence: verifiedkind: error1 citation(s)

Scope: SWF support bulletins

Meaning

The trimmer knives did not return to their start position. The bulletin says a bird's nest can stop the silver knife from seating under the black knife cover, or grease on the plunger can stop it recessing; the trimmer area has to be cleared and checked

Fix steps

  1. A bird's nest can stop the silver knife from seating under the black knife cover
  2. Remove the needle plates, clear any thread or debris under the black piece, and check that the silver knife swings out and seats fully
  3. If grease has built up on the plunger, clean it so the plunger recesses and can fire again on the next trim command

Citations

https://s3.amazonaws.com/helpscout.net/docs/assets/586fdcdb90336009736c3504/attachments/587189c790336009736c3cbd/211201974-Error-102-103.pdf

type: manual · retrieved: 2026-11-21 · locator: p. 1

An Error 103 indicates that the knives did not return to their start position.
Independent and unofficial. Verify against the manual for your exact model and serial number before acting. See this code on the owning surface: FaultDesk.