101 — SWF
Main board or overload
severity: stopconfidence: verifiedkind: error1 citation(s)
Scope: SWF support bulletins
Meaning
The control reports a main-board fault or an overload and stops the machine. The support bulletin groups 101 with 102 and names a bird's nest, thread caught in the hook area, as the most common cause; the hook area and tensions are the first checks
Fix steps
- The most common cause is a bird's nest: thread caught in the hook area, usually from incorrect bobbin tension, a dirty bobbin case, or a bobbin that is not seated correctly
- Remove the excess thread from under the needle plate, remove the bobbin and case, clean the case, re-seat the bobbin, set the bobbin tension, then check the pre-tension and main tension
Citations
type: manual · retrieved: 2026-11-21 · locator: p. 1
What are ERRORS 101 AND 102 (Main Board and Overload) and how to resolve it.
Independent and unofficial. Verify against the manual for your exact model and serial number before acting. See this code on the owning surface: FaultDesk.