2x98 — SolarEdge
Arc detector self-test failed
severity: stopconfidence: verifiedkind: error1 citation(s)
Scope: SolarEdge single-phase and three-phase inverters (Europe & APAC)
Meaning
The inverter's arc-fault detector failed its own self-test. This is a self-test/hardware failure rather than a detected arc, and the addendum lists no field remedy.
Likely causes
- Arc-detection circuit fault inside the inverter
- Firmware or detector self-test failure
Checks
- Note the code and serial number
- Contact SolarEdge support; the arc protection must not be bypassed
Safety flags
- dc_arc
Requires a qualified installer. Isolate and escalate to a qualified installer/electrician.
Parts
- inverter
Citations
type: manual · retrieved: 2026-11-21 · locator: p. 5
Arc detector self-test failed
Independent and unofficial. Verify against the manual for your exact model and serial number before acting. See this code on the owning surface: SolarDesk.