2x24 — SolarEdge
DC injection (line 1/2/3)
severity: stopconfidence: verifiedkind: error1 citation(s)
Scope: SolarEdge single-phase and three-phase inverters (Europe & APAC)
Meaning
The inverter detected DC current injected into the AC output on one of the lines, which indicates a problem in the inverter's output stage. The addendum has no field remedy and directs you to contact SolarEdge support.
Likely causes
- Output-stage (H-bridge) fault in the inverter
- Current-sensor or control-loop fault
Checks
- Note the code and serial number
- Contact SolarEdge support; do not keep the inverter connected to the grid
Safety flags
- grid_tie
- pv_dc
Requires a qualified installer. Isolate and escalate to a qualified installer/electrician.
Parts
- inverter
Citations
type: manual · retrieved: 2026-11-21 · locator: p. 3
DC Injection (Line 1/2/3) Contact SolarEdge support.
Independent and unofficial. Verify against the manual for your exact model and serial number before acting. See this code on the owning surface: SolarDesk.