2x22 — SolarEdge
AC frequency too high (line 1/2/3)
severity: degradedconfidence: verifiedkind: error1 citation(s)
Scope: SolarEdge single-phase and three-phase inverters (Europe & APAC)
Meaning
The inverter measured an AC grid frequency above the upper limit of the selected country grid code, so it disconnected from the grid. The addendum lists the message without a field repair; the cause is on the grid side or in the country setting.
Likely causes
- Grid frequency excursion above the country limit
- Inverter set to the wrong country/grid code
- Local generator or backup source holding the frequency high
Checks
- Confirm the country/grid-code setting in SetApp
- Ask the grid operator whether a frequency excursion was recorded
- Check that no local generator is back-feeding the site
Safety flags
- grid_tie
Requires a qualified installer. Isolate and escalate to a qualified installer/electrician.
Parts
- AC wiring
Citations
type: manual · retrieved: 2026-11-21 · locator: p. 3
AC Freq Too High (Line 1/2/3)
Independent and unofficial. Verify against the manual for your exact model and serial number before acting. See this code on the owning surface: SolarDesk.