2x11 — SolarEdge
Temperature too high
severity: degradedconfidence: verifiedkind: error1 citation(s)
Scope: SolarEdge single-phase and three-phase inverters (Europe & APAC)
Meaning
The inverter's internal temperature exceeded its limit. The addendum says to verify proper inverter clearances and make sure the heat-sink fins are clean and unobstructed.
Likely causes
- Blocked airflow around the inverter
- Dirty or obstructed heat-sink fins
- High ambient temperature at the mounting location
Checks
- Verify the clearances around the inverter match the installation guide
- Check that the heat-sink fins are clean and unobstructed
- Measure the ambient temperature at the mounting location
Requires a qualified installer. Isolate and escalate to a qualified installer/electrician.
Parts
- heat sink
- cooling
Citations
type: manual · retrieved: 2026-11-21 · locator: p. 3
Temperature Too High Over temperature Verify proper inverter clearances. Make sure the heat-sink fins are clean and unobstructed.
Independent and unofficial. Verify against the manual for your exact model and serial number before acting. See this code on the owning surface: SolarDesk.