9101 — SMA
AC voltage calibration failed
severity: stopconfidence: verifiedkind: error1 citation(s)
Scope: SMA Sunny Tripower 3.0 / 4.0 / 5.0 / 6.0 (STPxx-3AV-40)
Meaning
An error occurred while the inverter was calibrating its AC voltage measurement, so its grid-voltage readings cannot be trusted. SMA states that the cause must be determined by the Service and gives no field repair.
Likely causes
- AC voltage measurement or calibration circuit fault
- Control-board fault inside the inverter
Checks
- Note the event number and the inverter serial number
- Contact SMA Service; do not attempt a field repair
Safety flags
- grid_tie
Requires a qualified installer. Isolate and escalate to a qualified installer/electrician.
Parts
- inverter
- AC measurement
Citations
https://files.sma.de/downloads/STP3-6-3AV-40-BE-en-22.pdf
type: manual · retrieved: 2026-11-21 · locator: p. 100
Explanation: An error has occurred during calibration. The cause must be determined by the Service.
Independent and unofficial. Verify against the manual for your exact model and serial number before acting. See this code on the owning surface: SolarDesk.