8709 — SMA
Timeout in communication for reactive power / cos phi setpoint
severity: warningconfidence: verifiedkind: error1 citation(s)
Scope: SMA Sunny Tripower 3.0 / 4.0 / 5.0 / 6.0 (STPxx-3AV-40)
Meaning
Event 8709 is 'Timeout in communication for reactive power setpoint' and event 8710 is 'Timeout in communication for cos phi setpoint'. SMA's explanation is that communication to the system control is absent, so the inverter falls back to the last received values or to the configured set value, and it asks for the connection to the system manager (e.g. Sunny Home Manager) to be checked for damage and pulled plugs.
Likely causes
- System manager offline or unreachable
- Damaged or disconnected communication cable
- Network fault between inverter and system manager
Checks
- Ensure that the connection to the system manager is intact
- Check that no cables are damaged and no plugs have been pulled
- Confirm the fall-back setpoint with the grid operator if the message persists
Parts
- communication
- system manager
Citations
https://files.sma.de/downloads/STP3-6-3AV-40-BE-en-22.pdf
type: manual · retrieved: 2026-11-21 · locator: p. 98
Explanation: Communication to the system control absent.
Independent and unofficial. Verify against the manual for your exact model and serial number before acting. See this code on the owning surface: SolarDesk.