7001 — SMA
Fault sensor interior temperature
severity: stopconfidence: verifiedkind: error1 citation(s)
Scope: SMA Sunny Tripower 3.0 / 4.0 / 5.0 / 6.0 (STPxx-3AV-40)
Meaning
Events 7001 and 7002 report 'Fault sensor interior temperature': a temperature sensor inside the inverter is defective, the inverter interrupts feed-in operation, and the cause must be determined by the Service. SMA's only measure is to contact Service.
Likely causes
- Internal temperature sensor failed or disconnected
- Sensor harness or measurement circuit fault on the control board
Checks
- Note the event number and the inverter serial number
- Contact SMA Service; do not open the inverter to reseat the sensor
Requires a qualified installer. Isolate and escalate to a qualified installer/electrician.
Parts
- temperature sensor
Citations
https://files.sma.de/downloads/STP3-6-3AV-40-BE-en-22.pdf
type: manual · retrieved: 2026-11-21 · locator: p. 96
Explanation: A temperature sensor in the inverter is defective and the inverter interrupts the feed-in operation. The cause must be determined by the Service.
Independent and unofficial. Verify against the manual for your exact model and serial number before acting. See this code on the owning surface: SolarDesk.