601 — SMA
Grid incident - DC proportion in grid current too high
severity: degradedconfidence: verifiedkind: error1 citation(s)
Scope: SMA Sunny Tripower 3.0 / 4.0 / 5.0 / 6.0 (STPxx-3AV-40)
Meaning
The inverter has detected an excessively high proportion of direct current in the grid current and has disconnected from the utility grid. SMA tells the installer to check the grid connection for direct current and, if the message appears frequently, to ask the grid operator whether the monitoring threshold on the inverter may be raised.
Likely causes
- Direct current component on the AC side of the installation
- Fault in the inverter's output stage or current control
- Monitoring threshold not suited to the local grid
Checks
- Check the grid connection for direct current
- If the message appears frequently, contact the grid operator and ask whether the monitoring threshold can be raised
Safety flags
- grid_tie
- dc_bus
Requires a qualified installer. Isolate and escalate to a qualified installer/electrician.
Parts
- AC wiring
- inverter
Citations
https://files.sma.de/downloads/STP3-6-3AV-40-BE-en-22.pdf
type: manual · retrieved: 2026-11-21 · locator: p. 86
Explanation: The inverter has detected an excessively high proportion of direct current in the grid current.
Independent and unofficial. Verify against the manual for your exact model and serial number before acting. See this code on the owning surface: SolarDesk.