105 — SMA
Grid incident - grid voltage or grid impedance too high
severity: degradedconfidence: verifiedkind: error1 citation(s)
Scope: SMA Sunny Tripower 3.0 / 4.0 / 5.0 / 6.0 (STPxx-3AV-40)
Meaning
Events 101, 102, 103, 104 and 105 all report the same thing: the grid voltage or grid impedance at the inverter's connection point is too high, so the Sunny Tripower has disconnected from the utility grid. SMA's corrective measures are to verify that the grid voltage stays permanently inside the permissible range and, where the local grid is responsible, to have the grid operator adjust the voltage at the feed-in point or change the monitored operating limits.
Likely causes
- Grid voltage above the permissible range at the connection point
- High grid impedance on a weak or long grid connection
- Monitored operating limits not matching the local grid conditions
Checks
- Check whether the grid voltage at the connection point is permanently within the permissible range
- If local grid conditions keep it out of range, ask the grid operator to adjust the feed-in voltage or the monitored operating limits
- If the voltage is in range and the message persists, contact SMA Service
Safety flags
- grid_tie
Requires a qualified installer. Isolate and escalate to a qualified installer/electrician.
Parts
- grid connection
Citations
https://files.sma.de/downloads/STP3-6-3AV-40-BE-en-22.pdf
type: manual · retrieved: 2026-11-21 · locator: p. 81
Explanation: The grid voltage or grid impedance at the connection point of the inverter is too high. The inverter has disconnected from the utility grid.
Independent and unofficial. Verify against the manual for your exact model and serial number before acting. See this code on the owning surface: SolarDesk.