102 — SMA

Grid incident - grid voltage or grid impedance too high

severity: degradedconfidence: verifiedkind: error1 citation(s)

Scope: SMA Sunny Tripower 3.0 / 4.0 / 5.0 / 6.0 (STPxx-3AV-40)

Meaning

Events 101, 102, 103, 104 and 105 all report the same thing: the grid voltage or grid impedance at the inverter's connection point is too high, so the Sunny Tripower has disconnected from the utility grid. SMA's corrective measures are to verify that the grid voltage stays permanently inside the permissible range and, where the local grid is responsible, to have the grid operator adjust the voltage at the feed-in point or change the monitored operating limits.

Likely causes

Checks

Safety flags

Requires a qualified installer. Isolate and escalate to a qualified installer/electrician.

Parts

Citations

https://files.sma.de/downloads/STP3-6-3AV-40-BE-en-22.pdf

type: manual · retrieved: 2026-11-21 · locator: p. 80

Explanation: The grid voltage or grid impedance at the connection point of the inverter is too high. The inverter has disconnected from the utility grid.
Independent and unofficial. Verify against the manual for your exact model and serial number before acting. See this code on the owning surface: SolarDesk.