D41 — Barudan

Chenille Needle Height Error

severity: stopconfidence: verifiedkind: error1 citation(s)

Scope: Barudan XS/XY series

Meaning

The chenille needle-bar height or cancel position is wrong. The source says to reboot, then check the needle-bar drive levers for a bind and the needle-height origin sensor before calling technical support

Fix steps

  1. This error occurs when the needle bar height or cancel position is wrong
  2. Turn off the machine and reboot
  3. If still a problem, turn off the machine
  4. Then manually rotate the (needle bar) leveling shaft on the problem head and see if the needle bar drive levers inside move smoothly and freely and not in a bind
  5. Fix and correct any binds in the levers before turning the machine on again
  6. Then, rotate the shaft to the lower position and see if the LED for Needle height origin sensor lights when engaged
  7. Call Tech support for further help

Citations

https://www.barudanamerica.com/wp-content/uploads/2018/11/XS-XY_Error_Messages.pdf

type: manual · retrieved: 2026-11-21 · locator: p. 9

D41 Chenille Needle Height Error
Independent and unofficial. Verify against the manual for your exact model and serial number before acting. See this code on the owning surface: FaultDesk.