D29 — Barudan

Servo Driver Error

severity: stopconfidence: verifiedkind: error1 citation(s)

Scope: Barudan XS/XY series

Meaning

Something jammed the pantograph while sewing, or the servo electronics reported a fault. The source says to power off, check that the pantograph moves freely by hand, and remove any bind before restarting

Fix steps

  1. Something jammed the pantograph while sewing, or there is a problem with the Servo electronics
  2. Power off machine and make sure pantograph is not jammed by trying to move by hand
  3. Remove any binds before powering on again
  4. If no binds, power back On and see if it’s OK
  5. If still a problem, call tech support

Citations

https://www.barudanamerica.com/wp-content/uploads/2018/11/XS-XY_Error_Messages.pdf

type: manual · retrieved: 2026-11-21 · locator: p. 7

D29 Servo Driver Error
Independent and unofficial. Verify against the manual for your exact model and serial number before acting. See this code on the owning surface: FaultDesk.