D12 — Barudan

Trimmer slider error

severity: stopconfidence: verifiedkind: error1 citation(s)

Scope: Barudan XS/XY series

Meaning

The trimmer slider is stuck down or caught on un-trimmed thread. The source says to free the thread by hand, then check and adjust the trimmers or clean the slider so it moves smoothly

Fix steps

  1. Trimmer slider is stuck in down position or caught on un-trimmed thread
  2. If caught on un-trimmed thread, break thread by hand and pull about 2 inches (50mm) of thread before letting the trimmer slider pull thread up into the thread catch
  3. If machine continues to have D12 errors because it’s not trimming, check and adjust the trimmers
  4. Replace blades and wave washer if necessary
  5. If D12 is happening because slider is sticking, check slider operation by hand and clean or repair as necessary for smooth operation

Citations

https://www.barudanamerica.com/wp-content/uploads/2018/11/XS-XY_Error_Messages.pdf

type: manual · retrieved: 2026-11-21 · locator: p. 5

D12 Trimmer Slider Error
Independent and unofficial. Verify against the manual for your exact model and serial number before acting. See this code on the owning surface: FaultDesk.