D05 — Barudan

Color Change Error

severity: stopconfidence: verifiedkind: error1 citation(s)

Scope: Barudan XS/XY series

Meaning

The machine failed while trying to make a colour change. The source lists possible binds, including stuck thread-keep or jump solenoids, broken take-up levers, a cover in the way, or the degree wheel in the wrong position, and says to rotate the assembly by hand to find the bind

Fix steps

  1. Machine had an error trying to make a color change. Manually rotate the color change assembly to see if there are any binds in the color change movement. Possible Binds:
  2. One or more of the thread keep solenoids is stuck or out of position causing it to jam a head from moving
  3. One or more of the Jump solenoids is not engaging
  4. One or more take up levers are broken
  5. Sewing head side cover is interfering with head movement
  6. The Degree wheel is the wrong position. Correct any of these conditions before continuing. May need to power down and back On to reset the machine, afterwards

Citations

https://www.barudanamerica.com/wp-content/uploads/2018/11/XS-XY_Error_Messages.pdf

type: manual · retrieved: 2026-11-21 · locator: p. 4

D05 Color Change Error
Independent and unofficial. Verify against the manual for your exact model and serial number before acting. See this code on the owning surface: FaultDesk.