D04 — Barudan
Color Change Needle Sensor Error
severity: stopconfidence: verifiedkind: error1 citation(s)
Scope: Barudan XS/XY series
Meaning
The needle-select board in the colour-change assembly is not reporting exactly one active needle sensor. Rotate the assembly by hand to clear a bind, then check the board and sensor plate if the error remains
Fix steps
- Needle Select Board in Color Change Assembly has a sensor for each needle
- One sensor at a time should always be engaged and On
- First manually rotate the Color change assembly to see if it clears up the problem
- Do not force if color change is in a bind
- See Error D05 for possible binds
- If no binds and still getting this error, check the Needle select board to see if the sensor plate is bent or if any of the sensors are broken
- Replace the Needle select board
Citations
https://www.barudanamerica.com/wp-content/uploads/2018/11/XS-XY_Error_Messages.pdf
type: manual · retrieved: 2026-11-21 · locator: p. 4
D04 Color Change Needle Sensor Error
Independent and unofficial. Verify against the manual for your exact model and serial number before acting. See this code on the owning surface: FaultDesk.