D01 — Barudan

Needle Bar Not Locked

severity: stopconfidence: verifiedkind: error1 citation(s)

Scope: Barudan XS/XY series

Meaning

The needle bar did not reach the locked position for a colour change. The source points to the colour-change lock sensor or a mechanical bind; rotate the assembly by hand first, and do not force a bind

Fix steps

  1. Color Change Lock sensor is not engaged or not working properly
  2. Manually rotate the Color change assembly so the sensor plate engages the Lock sensor and retry
  3. If still a problem look to see if the Sensor LED is working
  4. If the Color Change assembly is in a bind or jammed, do not force
  5. See Error D05 for possible binds

Citations

https://www.barudanamerica.com/wp-content/uploads/2018/11/XS-XY_Error_Messages.pdf

type: manual · retrieved: 2026-11-21 · locator: p. 4

D01 Needle Bar Not Locked
Independent and unofficial. Verify against the manual for your exact model and serial number before acting. See this code on the owning surface: FaultDesk.