A11 — Barudan
No PC or peripheral device connected
severity: stopconfidence: verifiedkind: error1 citation(s)
Scope: Barudan XS/XY series
Meaning
The machine cannot see a PC or peripheral over the serial connection. The source says this happens when sending a design with a disconnected or broken COM cable; check the cable, then reboot the computer and the machine
Fix steps
- e This error occurs when sending a design to the machine from a PC with a COM/Serial cable, and the cable is disconnected or broken
- Check the cable connections first
- Next try rebooting the computer and the machine and try again
- If the COM connection has never worked before and you’re setting this up for the first time, then the PC program settings or cable connections are suspect
- Call tech or software support to help diagnose
Citations
https://www.barudanamerica.com/wp-content/uploads/2018/11/XS-XY_Error_Messages.pdf
type: manual · retrieved: 2026-11-21 · locator: p. 1
A11 No PC or Peripheral Device Connected Error
Independent and unofficial. Verify against the manual for your exact model and serial number before acting. See this code on the owning surface: FaultDesk.