A05 — Barudan

Wrong Tape Code or BAUD Rate Error

severity: stopconfidence: verifiedkind: error1 citation(s)

Scope: Barudan XS/XY series

Meaning

The tape-code or BAUD-rate setting used to send a design does not match the machine's IN COM setting, so the transfer is rejected. The source notes Barudan uses U code, Tajima EL and ZSK F, and requires both ends to use the same BAUD rate

Fix steps

  1. When sending a design via cable from a PC to the machine, the tape code setting on the PC must match the setting set on the machine in “IN COM” mode, otherwise you’ll get this error. Barudan = U code Tajima = EL code ZSK = F code Make sure the PC transfer machine setting matches the Machine “In COM” tape setting
  2. Also check that the BAUD rate setting on the machine matches the BAUD output from the PC software program. They must match or you’ll get this error. Call tech or software support to help diagnose

Citations

https://www.barudanamerica.com/wp-content/uploads/2018/11/XS-XY_Error_Messages.pdf

type: manual · retrieved: 2026-11-21 · locator: p. 1

A05 Wrong Tape Code or BAUD Rate Error
Independent and unofficial. Verify against the manual for your exact model and serial number before acting. See this code on the owning surface: FaultDesk.